Remove the rear wheel
EMOVE Cruiser V2
Tools
- Hex keys
- 18 mm socket or wrench
- A sturdy block to lift the rear
Real photo
Loading 3D 0%
See it on your scooter first
6 steps
This is a real Cruiser V2. Press Start and it turns into the factory 3D model, then each step shows which parts come off and in what order.
How this was worked out
The order of these steps is worked out from EMOVE's factory 3D model of the Cruiser V2 and checked with a collision test in that model. It is not an EMOVE service manual. Screw sizes come from the hole sizes in the model, and the axle nut size is measured on the model's nut. The model has no torque values, so none are given here.